====== Overview ======

Each board is designed as a Node, identified by a number from 1 to 255 (0 is for broadcast).
Each node peripheral is called a Device, and is numbered from 0 to n (n being the number of peripheral - 1).

====== Node id ======

Node ID is written in controller's EEPROM. To define a node's id, use command:
<code>
make writeaddress ADDRESS=0xnb
</code>
with nb the id for connected node (from 0x01 to 0xff).

Warning: controller's fuses must be set so that programming won't clear EEPROM, see [[ProgrammingFuses]].

======= Apps ======

A standard [[:Protocol|protocol]] for communication between nodes is defined.
The [[:Apps|apps]] framework implements an easy to use skeleton for you nodes.

======= Devices ======

The bugone framework is bundled with drivers

===== Temperature sensor =====
[[devices:ds18b20]]
[[devices:lm35]]

===== Humidity sensor =====
[[devices:hh10d]]
[[devices:dht11]]
[[devices:dht22]]

===== Dummy sensors =====
[[devices:const]]
[[devices:random]]
[[devices:text]]

====== others bits ======

[[optiboot]]

[[glossary]]